Adhesive and overspray buildup on presses
Hot, in-place removal of glue, stain, and finish overspray from press platens, conveyors, and hoods without solvents or line teardown.
The Triad — North Carolina
Mold Remediation in Greensboro & Winston-Salem, NC
Dry ice blasting removes mold growth and staining from joists, subfloor sheathing, band boards, studs, and roof decking without adding a drop of water to an assembly that is already fighting humidity.
Serving Guilford, Forsyth, Alamance, Davidson counties and nearby High Point, Burlington, Kernersville along the I-40 / I-85 split.
Local conditions
Why Greensboro & Winston-Salem changes how this job is done
Central Piedmont humidity with sharp seasonal swings. Older housing stock and uninsulated crawl assemblies make condensation-driven growth the dominant residential scenario.
What a Greensboro & Winston-Salem mold scope looks like
- Step 01
Moisture and cause assessment
Pin and pinless moisture readings on framing plus a look at the actual driver — condensation, ground moisture, plumbing, or storm intrusion. Cleaning without the cause fixed is a repeat call.
- Step 02
Containment and negative air
Poly containment, HEPA negative air machines, and CO2 monitoring in the work zone. Occupied areas of the building stay isolated from the blast media stream.
- Step 03
Dry ice blast pass
Media is driven at documented pressures so growth and staining lift out of the wood grain and truss crevices that sanding and wire wheels physically cannot reach.
- Step 04
HEPA vacuum and verification
Surfaces and horizontal collection areas are HEPA vacuumed, then photographed and documented for third-party clearance testing.
Standard of care
Work is scoped to the IICRC S520 principle of physical source removal — the growth comes off the substrate rather than being encapsulated or killed in place — with containment, negative air, and HEPA filtration through the whole blast window.
Common Greensboro & Winston-Salem calls
Fire smoke in open-frame industrial ceilings
Structural steel, deck, and mechanicals are cleaned without wetting motors, panels, or controls, shortening the return-to-production window.
Historic district masonry review
Documented test panels at defined pressures support submissions to local historic review boards before full-scale work begins.
Mold questions from Greensboro & Winston-Salem property owners
Does dry ice blasting kill mold?
We do not make a kill claim. Dry ice blasting physically removes mold growth and staining from the substrate, which is what the remediation standard actually asks for. Any antimicrobial application is a separate, optional step after source removal.
Will the wood be damaged?
Pressure is set per substrate and validated on a test panel before full-scale work. Dry ice is softer than sand or soda, so structural framing, heart pine, and soft historic brick clean without the substrate loss abrasive media causes.
How long does a crawlspace take?
Most single-family crawlspaces are a one- to two-day blast window depending on square footage, joist depth, and access. There is no dry-down period afterward, so the encapsulation or dehumidification trade can follow immediately.
Other services in Greensboro & Winston-Salem
Keep Going